Digital I/O Modules


ADAM-5000 DI/O modules are equipped with high density channels, isolation, short circuit protection, failure protection and hot swap functionality.

  • ADAM-5050


    The ADAM-5050 features sixteen digital input/output channels. Each channel can be independently configured to be an input or an output channel by the setting of its DIP switch. The digital outputs are open-collector transistor switches that can be controlled from the ADAM-5000. The switches can also be used to control solid-state relays, which in turn can control heaters, pumps and power equipment. The ADAM-5000 can use the module’s digital inputs to determine the state of limit or safety switches, or to receive remote digital signals.


  • ADAM-5051


    The ADAM-5051 provides sixteen digital input channels. The ADAM-5000 system can use the module’s digital inputs to determine the state of limit or safety switches or to receive remote digital signals.


  • ADAM-5051D


    The ADAM-5051D provides sixteen digital input channels with LED indicators. The ADAM-5000 system can use the module’s digital inputs to determine the state of limit or safety switches or to receive remote digital signals.


  • ADAM-5051S


    16-channel Isolated Digital Input w/ LED Module


  • ADAM-5052


    The ADAM-5052 provides eight fully independent isolated channels. All channel designed with 5000 VRMS isolation to prevent ground loop effects and the damage from power surges on the input lines.


  • ADAM-5053S


    32-ch Isolated Digital Input Module.


  • ADAM-5055S


    16-channel Isolated Digital I/O w/ LED Module


  • ADAM-5056D


    The ADAM-5056D features sixteen digital output channels with LED indicators. The digital outputs are open-collector transistor switches that you can control from the ADAM-5000 main unit. You also can use the switches to control solid-state relays.


  • ADAM-5056S


    16-ch Sink Type Isolated Digital Output w/ LED Module


  • ADAM-5056SO


    16-ch Source Type Isolated Digital Output w/LED


  • ADAM-5057S


    ADAM-5057S is a 32-ch Isolated Digital Output Module.


  • ADAM-5069


    ADAM-5069 is designed for on/off control in high-voltage applications. The major feature of ADAM-5069 is the power relay rating at 240 V AC and 5 A. This range can satisfy most requirements for driving externally controlled devices such as lights, fans, alarm systems, and various electronic devices in industrial automation, security, building and home automation applications. ADAM-5069 provides a jumper setting for output values. This jumper can be set to clear or keep output values when reset. To easily identify the module’s status, it has been designed with 8 LED indicators. It also provides eight form A channels, and when combined with selected controllers, it will provide the Modbus/RTU protocol for standard communication requirements.


Get Quote